IVECO T-Way 6x6: slide-on camper payload

Name: IVECO T-Way 6x6 Australian vehicle mass and payload records
Creator: Beyond RV

IVECO T-Way 6x6 has a recorded GVM of 33,500 kg. Chassis-cab mass is 10,154 kg to 10,257 kg; payload calculated as GVM minus that mass is 23,243 kg to 23,346 kg across 3 recorded variants. After a stated 390 kg allowance for occupants, accessories and gear, the remaining body and camper load allowance is 22,853 kg to 22,956 kg. [1]

What the allowance assumes

We subtract 160 kg for occupants, 150 kg for accessories and 80 kg for luggage and gear: 390 kg total. These are assumptions, not measured weights. Published mass bases differ; some already include a driver or fuel. Avoid counting those twice when entering your actual weights.

This is remaining mass allowance, not an approved camper dry weight. Allow for any excluded tray or body, mounting frame, water and camper equipment. No camper fitment verdict is available without verified camper mass, dimensions and centre of gravity.

Change the assumptions in the weight calculator. Enter your occupant, accessory and gear weights there; these assumptions are not automatically filled.

Recorded variants, highest calculated payload first

Model years: not specified in the source. Match your exact variant and mass basis. “Verified” describes the research record, not approval for a camper.

All figures in kilograms unless stated. Sources and review status apply to each row.
Variant / year	GVM / GCM	Chassis-cab mass	Payload / allowance	Tray / axle limits	Source and caveats
AD380T45W 6x6 Cab Chassis 3800mm wheelbaseYear not specified · day cab · 6x6 with TC 1800 two-speed transfer boxCalculate AD380T45W 6x6 Cab Chassis 3800mm wheelbase	33,500 kgGCM: 60,000 kg	10,154 kgIVECO indicative chassis tare mass with standard options, without fuel, AdBlue and driver. Plus or minus 3 percent tolerance appliesFront: Not published Rear: Not published	Calculated: 23,346 kgPublished body payload: Not publishedAfter 390 kg: 22,956 kgArithmetic: cannot cross-check	Tray inclusion unknown: confirm actual tray/body mass before using the allowance.Front axle limit: 8,000 kg Rear axle limit: 26,000 kgRear axle headroom before body and loads: UnavailableChassis provides a CAN OPEN bodybuilder interface. Obtain the IVECO body-builder directive and confirm frame loading before body design or mounting.	[1] T-Way 6x6 Cab Chassis AD380T45W Specification SheetSpecification sheet, "DIMENSIONS & WEIGHTS" table, 3800 mm wheelbase column; axle and suspension capacities from the "AXLE & SUSPENSION" table.source verifiedThe stored mass excludes fuel, AdBlue and driver, and this chassis carries a 550 litre fuel tank: a full tank of diesel alone is roughly 460 kg the figure does not include. Plus or minus 3 percent is a further plus or minus 305 kg. Weigh the delivered chassis before matching a camper. Overall length 8,697 mm, day cab with low roof, 2,300 mm wide. Maximum body length is not published and is not derived here. At this GVM a slide-on camper is a small fraction of the available payload; the limiting factor will be the body and subframe design, not the mass. IVECO's own sheet does not reconcile for this wheelbase: it prints 5,509 kg front and 4,654 kg rear against a 10,154 kg total, and those add to 10,163 kg. The published total is stored because payload is derived from it; the printed axle split is not stored at all, rather than recording a pair that contradicts it. The 4,500 and 4,200 mm columns on the same sheet both reconcile exactly.Official IVECO Australia specification sheet, read directly. Same series and same mass basis as the T-Way 4x4 sheet. States no model year.
AD380T45W 6x6 Cab Chassis 4200mm wheelbaseYear not specified · day cab · 6x6 with TC 1800 two-speed transfer boxCalculate AD380T45W 6x6 Cab Chassis 4200mm wheelbase	33,500 kgGCM: 60,000 kg	10,210 kgIVECO indicative chassis tare mass with standard options, without fuel, AdBlue and driver. Plus or minus 3 percent tolerance appliesFront: 5,550 kg Rear: 4,660 kg	Calculated: 23,290 kgPublished body payload: Not publishedAfter 390 kg: 22,900 kgArithmetic: cannot cross-check	Tray inclusion unknown: confirm actual tray/body mass before using the allowance.Front axle limit: 8,000 kg Rear axle limit: 26,000 kgRear axle headroom before body and loads: 21,340 kgChassis provides a CAN OPEN bodybuilder interface. Obtain the IVECO body-builder directive and confirm frame loading before body design or mounting.	[1] T-Way 6x6 Cab Chassis AD380T45W Specification SheetSpecification sheet, "DIMENSIONS & WEIGHTS" table, 4200 mm wheelbase column; axle and suspension capacities from the "AXLE & SUSPENSION" table.source verifiedThe stored mass excludes fuel, AdBlue and driver, and this chassis carries a 550 litre fuel tank: a full tank of diesel alone is roughly 460 kg the figure does not include. Plus or minus 3 percent is a further plus or minus 306 kg. Weigh the delivered chassis before matching a camper. Overall length 9,327 mm, day cab with low roof, 2,300 mm wide. Maximum body length is not published and is not derived here. At this GVM a slide-on camper is a small fraction of the available payload; the limiting factor will be the body and subframe design, not the mass.Official IVECO Australia specification sheet, read directly. Same series and same mass basis as the T-Way 4x4 sheet. States no model year.
AD380T45W 6x6 Cab Chassis 4500mm wheelbaseYear not specified · day cab · 6x6 with TC 1800 two-speed transfer boxCalculate AD380T45W 6x6 Cab Chassis 4500mm wheelbase	33,500 kgGCM: 60,000 kg	10,257 kgIVECO indicative chassis tare mass with standard options, without fuel, AdBlue and driver. Plus or minus 3 percent tolerance appliesFront: 5,589 kg Rear: 4,668 kg	Calculated: 23,243 kgPublished body payload: Not publishedAfter 390 kg: 22,853 kgArithmetic: cannot cross-check	Tray inclusion unknown: confirm actual tray/body mass before using the allowance.Front axle limit: 8,000 kg Rear axle limit: 26,000 kgRear axle headroom before body and loads: 21,332 kgChassis provides a CAN OPEN bodybuilder interface. Obtain the IVECO body-builder directive and confirm frame loading before body design or mounting.	[1] T-Way 6x6 Cab Chassis AD380T45W Specification SheetSpecification sheet, "DIMENSIONS & WEIGHTS" table, 4500 mm wheelbase column; axle and suspension capacities from the "AXLE & SUSPENSION" table.source verifiedThe stored mass excludes fuel, AdBlue and driver, and this chassis carries a 550 litre fuel tank: a full tank of diesel alone is roughly 460 kg the figure does not include. Plus or minus 3 percent is a further plus or minus 308 kg. Weigh the delivered chassis before matching a camper. Overall length 9,597 mm, day cab with low roof, 2,300 mm wide. Maximum body length is not published and is not derived here. At this GVM a slide-on camper is a small fraction of the available payload; the limiting factor will be the body and subframe design, not the mass.Official IVECO Australia specification sheet, read directly. Same series and same mass basis as the T-Way 4x4 sheet. States no model year.

Rear axle headroom is the published limit minus the recorded chassis-cab rear mass, where both exist. The body, subframe and loaded camper consume this margin; front axle, tyres and load distribution still need checking.

GVM upgrade arithmetic

If GCM stays unchanged, each extra kilogram of loaded vehicle mass leaves one kilogram less under GCM for a trailer. The IVECO T-Way 6x6 table uses published GCM minus hypothetical GVM; it does not certify an upgrade or override the published towing limit. No certified upgrade figures are recorded. The increments below are illustrative scenarios, not available or approved upgrades. They assume the vehicle is loaded to the stated hypothetical GVM and GCM stays unchanged.

Combination-mass allowance for a trailer at full GVM, before towing and other limits
Variant	Published GCM	At stock GVM	GVM +500 kg	GVM +1000 kg	GVM +1500 kg	Published braked towing limit
AD380T45W 6x6 Cab Chassis 3800mm wheelbase · year unspecified · day cab · 6x6 with TC 1800 two-speed transfer boxVariant and source [1]	60,000 kg	26,500 kgGVM 33,500 kg	26,000 kgHypothetical GVM 34,000 kg	25,500 kgHypothetical GVM 34,500 kg	25,000 kgHypothetical GVM 35,000 kg	Not published
AD380T45W 6x6 Cab Chassis 4200mm wheelbase · year unspecified · day cab · 6x6 with TC 1800 two-speed transfer boxVariant and source [1]	60,000 kg	26,500 kgGVM 33,500 kg	26,000 kgHypothetical GVM 34,000 kg	25,500 kgHypothetical GVM 34,500 kg	25,000 kgHypothetical GVM 35,000 kg	Not published
AD380T45W 6x6 Cab Chassis 4500mm wheelbase · year unspecified · day cab · 6x6 with TC 1800 two-speed transfer boxVariant and source [1]	60,000 kg	26,500 kgGVM 33,500 kg	26,000 kgHypothetical GVM 34,000 kg	25,500 kgHypothetical GVM 34,500 kg	25,000 kgHypothetical GVM 35,000 kg	Not published

A negative result means the hypothetical vehicle mass already exceeds GCM. A positive result is not permission to tow that mass: the manufacturer's towing rating, towbar, towball load, axle limits and actual certification also apply.

Manufacturer sources and currency

These are stored research figures, not a live check of current specifications. Access dates below identify when each source was recorded.

T-Way 6x6 Cab Chassis AD380T45W Specification Sheet — IVECO Trucks Australia. Accessed 2026-09-05.
Official IVECO Australia specification sheet, read directly. Same series and same mass basis as the T-Way 4x4 sheet. States no model year.

IVECO T-Way 6x6 payload questions

What is the payload of a IVECO T-Way 6x6?

How much can a IVECO T-Way 6x6 carry with a slide-on camper?

The calculated allowance is 22,853 kg to 22,956 kg after 160 kg for occupants, 150 kg for accessories and 80 kg for gear. Any tray or body excluded from the recorded mass, camper water and camper equipment still have to be allowed for. This is not a camper fitment verdict.

Does a GVM upgrade reduce a IVECO T-Way 6x6's towing capacity?

Check your actual weights in the calculator

This tool provides an estimate only. Final suitability depends on your exact vehicle variant, compliance plate, manufacturer specifications, towbar rating, axle limits, tyre ratings, accessories, real loaded weights and certified weighbridge results. Beyond RV weighs your vehicle at the factory before build, and those figures decide the final answer.