IVECO T-Way 4x4: slide-on camper payload

Name: IVECO T-Way 4x4 Australian vehicle mass and payload records
Creator: Beyond RV

IVECO T-Way 4x4 has a recorded GVM of 20,500 kg. Chassis-cab mass is 7,360 kg to 7,480 kg; payload calculated as GVM minus that mass is 13,020 kg to 13,140 kg across 3 recorded variants. After a stated 390 kg allowance for occupants, accessories and gear, the remaining body and camper load allowance is 12,630 kg to 12,750 kg. [1]

What the allowance assumes

We subtract 160 kg for occupants, 150 kg for accessories and 80 kg for luggage and gear: 390 kg total. These are assumptions, not measured weights. Published mass bases differ; some already include a driver or fuel. Avoid counting those twice when entering your actual weights.

This is remaining mass allowance, not an approved camper dry weight. Allow for any excluded tray or body, mounting frame, water and camper equipment. No camper fitment verdict is available without verified camper mass, dimensions and centre of gravity.

Change the assumptions in the weight calculator. Enter your occupant, accessory and gear weights there; these assumptions are not automatically filled.

Recorded variants, highest calculated payload first

Model years: not specified in the source. Match your exact variant and mass basis. “Verified” describes the research record, not approval for a camper.

All figures in kilograms unless stated. Sources and review status apply to each row.
Variant / year	GVM / GCM	Chassis-cab mass	Payload / allowance	Tray / axle limits	Source and caveats
AD190T36W 4x4 Cab Chassis 3800mm wheelbaseYear not specified · day cab · 4x4 with TC 1800 two-speed transfer boxCalculate AD190T36W 4x4 Cab Chassis 3800mm wheelbase	20,500 kgGCM: 44,000 kg	7,360 kgIVECO indicative chassis tare mass with standard options, without fuel, AdBlue and driver. Plus or minus 3 percent tolerance appliesFront: 5,010 kg Rear: 2,350 kg	Calculated: 13,140 kgPublished body payload: Not publishedAfter 390 kg: 12,750 kgArithmetic: cannot cross-check	Tray inclusion unknown: confirm actual tray/body mass before using the allowance.Front axle limit: 8,000 kg Rear axle limit: 13,000 kgRear axle headroom before body and loads: 10,650 kgChassis provides a CAN OPEN bodybuilder interface and a chassis-mounted jump start plug. Obtain the IVECO body-builder directive and confirm frame loading before body design or mounting.	[1] T-Way 4x4 Cab Chassis AD190T36W Specification SheetSpecification sheet page 4, "DIMENSIONS & WEIGHTS" table, 3800 mm wheelbase column; axle and suspension capacities from the "AXLE & SUSPENSION" table on page 2.source verifiedThe stored mass excludes fuel, AdBlue and driver, and this chassis carries a 550 litre fuel tank and an 80 litre AdBlue tank: a full tank of diesel alone is roughly 460 kg that the figure does not include. Plus or minus 3 percent is a further plus or minus 221 kg. Weigh the delivered chassis before matching a camper. The optional Cursor 13 engine adds 442 kg per the same sheet and is not stored as a separate row. Overall length 6,672 mm, rear overhang 1,195 mm, unladen frame height 1,181 mm, cab 2,300 mm wide day cab with low roof. Cab-to-rear-axle and maximum body length are not published; the sheet gives front-axle-to-back-of-cab as 480 mm (580 mm with the Cursor 13 or a vertical exhaust) and that is not derived here.Official IVECO Australia specification sheet, read directly. Publishes total kerb weight and a front/rear split for all three wheelbases, plated GVM and GCM, and axle and suspension capacities. States no model year. IVECO also publishes 6x6 (AD380T45W) and 8x4 (AD410T51) sheets in the same series that have not been extracted.
AD190T36W 4x4 Cab Chassis 4200mm wheelbaseYear not specified · day cab · 4x4 with TC 1800 two-speed transfer boxCalculate AD190T36W 4x4 Cab Chassis 4200mm wheelbase	20,500 kgGCM: 44,000 kg	7,383 kgIVECO indicative chassis tare mass with standard options, without fuel, AdBlue and driver. Plus or minus 3 percent tolerance appliesFront: 5,061 kg Rear: 2,322 kg	Calculated: 13,117 kgPublished body payload: Not publishedAfter 390 kg: 12,727 kgArithmetic: cannot cross-check	Tray inclusion unknown: confirm actual tray/body mass before using the allowance.Front axle limit: 8,000 kg Rear axle limit: 13,000 kgRear axle headroom before body and loads: 10,678 kgChassis provides a CAN OPEN bodybuilder interface and a chassis-mounted jump start plug. Obtain the IVECO body-builder directive and confirm frame loading before body design or mounting.	[1] T-Way 4x4 Cab Chassis AD190T36W Specification SheetSpecification sheet page 4, "DIMENSIONS & WEIGHTS" table, 4200 mm wheelbase column; axle and suspension capacities from the "AXLE & SUSPENSION" table on page 2.source verifiedThe stored mass excludes fuel, AdBlue and driver, and this chassis carries a 550 litre fuel tank and an 80 litre AdBlue tank: a full tank of diesel alone is roughly 460 kg that the figure does not include. Plus or minus 3 percent is a further plus or minus 221 kg. Weigh the delivered chassis before matching a camper. The optional Cursor 13 engine adds 442 kg per the same sheet and is not stored as a separate row. Overall length 7,077 mm, rear overhang 1,195 mm, unladen frame height 1,181 mm, cab 2,300 mm wide day cab with low roof. Cab-to-rear-axle and maximum body length are not published; the sheet gives front-axle-to-back-of-cab as 480 mm (580 mm with the Cursor 13 or a vertical exhaust) and that is not derived here.Official IVECO Australia specification sheet, read directly. Publishes total kerb weight and a front/rear split for all three wheelbases, plated GVM and GCM, and axle and suspension capacities. States no model year. IVECO also publishes 6x6 (AD380T45W) and 8x4 (AD410T51) sheets in the same series that have not been extracted.
AD190T36W 4x4 Cab Chassis 4500mm wheelbaseYear not specified · day cab · 4x4 with TC 1800 two-speed transfer boxCalculate AD190T36W 4x4 Cab Chassis 4500mm wheelbase	20,500 kgGCM: 44,000 kg	7,480 kgIVECO indicative chassis tare mass with standard options, without fuel, AdBlue and driver. Plus or minus 3 percent tolerance appliesFront: 5,077 kg Rear: 2,403 kg	Calculated: 13,020 kgPublished body payload: Not publishedAfter 390 kg: 12,630 kgArithmetic: cannot cross-check	Tray inclusion unknown: confirm actual tray/body mass before using the allowance.Front axle limit: 8,000 kg Rear axle limit: 13,000 kgRear axle headroom before body and loads: 10,597 kgChassis provides a CAN OPEN bodybuilder interface and a chassis-mounted jump start plug. Obtain the IVECO body-builder directive and confirm frame loading before body design or mounting.	[1] T-Way 4x4 Cab Chassis AD190T36W Specification SheetSpecification sheet page 4, "DIMENSIONS & WEIGHTS" table, 4500 mm wheelbase column; axle and suspension capacities from the "AXLE & SUSPENSION" table on page 2.source verifiedThe stored mass excludes fuel, AdBlue and driver, and this chassis carries a 550 litre fuel tank and an 80 litre AdBlue tank: a full tank of diesel alone is roughly 460 kg that the figure does not include. Plus or minus 3 percent is a further plus or minus 224 kg. Weigh the delivered chassis before matching a camper. The optional Cursor 13 engine adds 442 kg per the same sheet and is not stored as a separate row. Overall length 7,932 mm, rear overhang 1,780 mm, unladen frame height 1,181 mm, cab 2,300 mm wide day cab with low roof. Cab-to-rear-axle and maximum body length are not published; the sheet gives front-axle-to-back-of-cab as 480 mm (580 mm with the Cursor 13 or a vertical exhaust) and that is not derived here.Official IVECO Australia specification sheet, read directly. Publishes total kerb weight and a front/rear split for all three wheelbases, plated GVM and GCM, and axle and suspension capacities. States no model year. IVECO also publishes 6x6 (AD380T45W) and 8x4 (AD410T51) sheets in the same series that have not been extracted.

Rear axle headroom is the published limit minus the recorded chassis-cab rear mass, where both exist. The body, subframe and loaded camper consume this margin; front axle, tyres and load distribution still need checking.

GVM upgrade arithmetic

If GCM stays unchanged, each extra kilogram of loaded vehicle mass leaves one kilogram less under GCM for a trailer. The IVECO T-Way 4x4 table uses published GCM minus hypothetical GVM; it does not certify an upgrade or override the published towing limit. No certified upgrade figures are recorded. The increments below are illustrative scenarios, not available or approved upgrades. They assume the vehicle is loaded to the stated hypothetical GVM and GCM stays unchanged.

Combination-mass allowance for a trailer at full GVM, before towing and other limits
Variant	Published GCM	At stock GVM	GVM +500 kg	GVM +1000 kg	GVM +1500 kg	Published braked towing limit
AD190T36W 4x4 Cab Chassis 3800mm wheelbase · year unspecified · day cab · 4x4 with TC 1800 two-speed transfer boxVariant and source [1]	44,000 kg	23,500 kgGVM 20,500 kg	23,000 kgHypothetical GVM 21,000 kg	22,500 kgHypothetical GVM 21,500 kg	22,000 kgHypothetical GVM 22,000 kg	Not published
AD190T36W 4x4 Cab Chassis 4200mm wheelbase · year unspecified · day cab · 4x4 with TC 1800 two-speed transfer boxVariant and source [1]	44,000 kg	23,500 kgGVM 20,500 kg	23,000 kgHypothetical GVM 21,000 kg	22,500 kgHypothetical GVM 21,500 kg	22,000 kgHypothetical GVM 22,000 kg	Not published
AD190T36W 4x4 Cab Chassis 4500mm wheelbase · year unspecified · day cab · 4x4 with TC 1800 two-speed transfer boxVariant and source [1]	44,000 kg	23,500 kgGVM 20,500 kg	23,000 kgHypothetical GVM 21,000 kg	22,500 kgHypothetical GVM 21,500 kg	22,000 kgHypothetical GVM 22,000 kg	Not published

A negative result means the hypothetical vehicle mass already exceeds GCM. A positive result is not permission to tow that mass: the manufacturer's towing rating, towbar, towball load, axle limits and actual certification also apply.

Manufacturer sources and currency

These are stored research figures, not a live check of current specifications. Access dates below identify when each source was recorded.

T-Way 4x4 Cab Chassis AD190T36W Specification Sheet — IVECO Trucks Australia. Accessed 2026-09-04.
Official IVECO Australia specification sheet, read directly. Publishes total kerb weight and a front/rear split for all three wheelbases, plated GVM and GCM, and axle and suspension capacities. States no model year. IVECO also publishes 6x6 (AD380T45W) and 8x4 (AD410T51) sheets in the same series that have not been extracted.

IVECO T-Way 4x4 payload questions

What is the payload of a IVECO T-Way 4x4?

How much can a IVECO T-Way 4x4 carry with a slide-on camper?

The calculated allowance is 12,630 kg to 12,750 kg after 160 kg for occupants, 150 kg for accessories and 80 kg for gear. Any tray or body excluded from the recorded mass, camper water and camper equipment still have to be allowed for. This is not a camper fitment verdict.

Does a GVM upgrade reduce a IVECO T-Way 4x4's towing capacity?

Check your actual weights in the calculator

This tool provides an estimate only. Final suitability depends on your exact vehicle variant, compliance plate, manufacturer specifications, towbar rating, axle limits, tyre ratings, accessories, real loaded weights and certified weighbridge results. Beyond RV weighs your vehicle at the factory before build, and those figures decide the final answer.